there are different kinds of screw drivers,which screw driver tip looks a plus signA. flat screw driverB. philips screw driverC. trim screw driverD. jack screw driver
1. there are different kinds of screw drivers,which screw driver tip looks a plus signA. flat screw driverB. philips screw driverC. trim screw driverD. jack screw driver
Answer:
hope my answer help
Explanation:
1.B
2. 12. A type of screw driver that has cross-like tip at the end and used in a cross groove head of the screws a. Star screw driver b. flat screw driver C. Screw driver d. screw
Answer:
Philips screwdriverExplanation:
A Phillips screwdriver has a head with pointed edges in the shape of a cross, which fit neatly into the cross slots of a Phillips screw.
3. 2. Screw driver is a general term. What is the specific name of a screw driver tip looks like a line?a Philips screw driver b. Flat screw driver c. Allen screw driver d. Stubby screve
Answer:
B flat screw driver
Explanation:
Answer:
Allen screw driver
Explanation:
Screwdriver tips are available in a wide variety of types and sizes (List of screw drives). The two most common are the simple 'blade'-type for slotted screws, and
What is the name of the screw driver?
The tool used to drive a slotted screw head is called a standard, common blade, flat-blade, slot-head, straight, flat, flat-tip, or "flat-head" screwdriver.
4. 2. Which of the tools listed below is used to loosen or tighten screw with a cross like depression? a. torx screw driver c. hex screw driver b. phillip head screw driver d. flat head screw driver
Answer:
D.) FLAT HEAD SCREW DRIVER
Explanation:
A flat-head screwdriver is a screwdriver with a wedge-shaped flat tip, used to tighten or loosen screws that have a straight, linear notch in their heads. ... This flat tip is perfectly sized to fit into a screw with a straight head slot with a corresponding shape
5. 3. When driving cross head screws, what electrical tool is needed? * A. standard screw driver B. pliers C. screw driver D. Philips screw driver E. Other:
Answer:
C. screw driver;)))))))))
6. screw driver meaning
Answer:
A screwdriver is a tool which refers to A type of tool Called "Hand Tool" that means a type of tool using Hand...
Explanation:
I hope Nakatulong:)
7. 5. What kind of electronic tool is used to tighten or loosen a hexagonal shapedscrews?a. Philips screw driverb. Alen wrenchC. Flat screw driverd. Torx Screw driverscrew
Answer:
A. philips screw driver
Explanation:
not sure
Answer:
Allen wrench
Recessed-head screws or set screws commonly have a hexagonally shaped recess and require a special wrench, usually referred to as an Allen wrench; it consists of a hexagonal bar of tool steel shaped into the form of an L, either end of which fits into the recess.
8. screw driver is to screw as hammer is to
Answer:
Pound
Explanation:
#CarryOnLearnjng
9. 8. What kind of electronic tool is used to tighten or loosen a hexagonal shapedscrews?a. Philips screw driverb. Alen wrenchC. Flat screw driverd. Torx Screw driverloosen a star Slotted screv
Answer:
Letter B
#CarryonlearningAnswer:
B. Allen wrenchExplanation:
Allen wrench
Recessed-head screws or set screws commonly have a hexagonally shaped recess and require a special wrench, usually referred to as an Allen wrench; it consists of a hexagonal bar of tool steel shaped into the form of an L, either end of which fits into the recess.
10. 1.The blade tip is wedge-shaped and resembles a negative (-) sign.This is used to drive screws with a single slot head.A.Flat screw driverB.Allen screw driver C.Philips screw driverD.stubby screw
Answer:
A
pa brainliest po.
#sana_makatulong
11. How will you use the screw driver to tighten a screw?How will you use the screw driver to tighten a screw?
With one hand, hold the screwdriver's tip while turning the handle with the other. Grasp the handle with your dominant hand and the tip with your other hand as close to the screw head as possible. Turn the screwdriver clockwise to tighten the screw and counterclockwise to loosen it with necessary force.
HOPE IT HELPS, HAVE A GOOD DAY.
Answer:
To use a screwdriver, you must match the screwdriver tip to the fastener's head. The most commonly used are the flat-head and Phillips-head screwdrivers. A screwdriver allows you to tighten a screw by turning the driver clockwise and loosen it by turning counterclockwise. It has a tough steel shaft with a bit on the end of the blade attached to a square, round or hexagonal plastic, metal or wooden handle. The screwdriver -- categorized by its bit type -- has a shaped tip that engages the fastener, which is what allows you to turn the screw.
Explanation:
Diko alam pano e explain pero hope na maka tulong
12. turn the screw driver to loosen the screw
Answer:
So turn the screwdriver clockwise to tighten the screw.
Counter-clockwise to loosen the screw
13. use a philips head screw driver with _______ screws
Answer:
If the only screwdriver you own is flat-headed, you can use this to remove Phillips head screws
Explanation:
Phillips head screws have two grooves that form a cross on the top and are the most common type of screws in use. Be careful when using the following methods as it is very easy to strip or wear down the corners formed by the grooves and the head of the screw. Stripped screws become very difficult to remove.
14. Why do we use a flatscrew driver in driving thehead of flat screw instadof a philip screw driver?
Answer:
A flat-head screwdriver is a screwdriver with a wedge-shaped flat tip, used to tighten or loosen screws that have a straight, linear notch in their heads
The reason the phillips screw was invented was to allow the screwdriver to "torque-out" of the screw rather than break the screw head off if you over-tighten it. It's also easier to hold the screwdriver in.
15. Screw driver classification
Answer:
Hand tool
Explanation:
nsksndhchcksoenc
16. 27. A tool used for driving and turning flat screw. a. screwdriver b. flat screw driver c. Phillip screw driver d. Wrenches
Answer:
b
Explanation:
flat screwdriver cause it's common on a question
17. a. Philips screw driverc. Flat screw driverb. Alen wrenchd. Torx Screw driver9. What kind of electronic tool is intended in tighten or loosen a star slotted screw??
Answer:
a.philips screw driver
Answer:
C.Flat screw driver
Explanation:
used to tighten or loosen slooted screw.
18. how does flat screw driver differs in use with philips screw driver?
Answer:
A flathead has a single blade, and a Phillips has two blades in the shape of a cross. Attempts to use a flathead tool on a screw designed for a Phillips usually won't be successful, and a Phillips screwdriver could never be used on a slotted screw. ... The flathead has been in use far longer than the Phillips.
Answer:
A flathead has a single blade, and a Phillips has two blades in the shape of a cross. Attempts to use a flathead tool on a screw designed for a Phillips usually won't be successful, and a Phillips screwdriver could never be used on a slotted screw. ... The flathead has been in use far longer than the Phillips.
Explanation:
I hope it helps po :)
19. function of screw driver
Answer:
A screwdriver is a tool, manual or powered, used for screwing (installing) and unscrewing (removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle.
I hope this gonna help you
#CarryOnLearning
20. atDirection: Encircle the letter of the correct answer.1.A type of screrew driver that has a cross tip resemblingpositive (+) sign. This is used to drive screws with cross slotheads.A. Allen Screw DriverB. Philips Screw DriverC. Stubby Screw DriverD. Standard Screw Driver2. This type of screw driver is to drive screw with hexagonalslot head.A. Allen Screw DriverB. Philips Screw DriverC. Stubby Screw Driver D. Standard Screw Driver3. A screw driver with short shank or blade and a shortedhandle used to turn screws in tight space.A. Allen Screw DriverB. Philips Screw DriverC. Stubby Screw Driver D. Standard Screw Driver4. A tool used in driving or pounding and pulling out nails.A. PliersB. Wire StripperC. Electricians KnifeD. Hammer5. A tool used to cut metal conduit and armored cable.A. PliersB. HacksawC. Electricians KnifeD. Steel Tape
Answer:
1. B.philips screw driver
2. A.allen screw driver
3. C.stubby screw driver
4. D.hammer
5. B.hacksaw
Explanation:
21. Importance of screw drivers
Answer:
A screwdriver is a tool, manual or powered, used for screwing (installing) and unscrewing (removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle
22. It is a tool that is usually used for small screws and adjusting trimmer.a.flat screw driverb.precision screwc.philip scree driverd.jeweler's screw driverexplanation?
Answer:
D. jeweler's screwdriver
thanks me later
Answer:
A. Flat screw driver is adjusting trimmer for small screws
Explanation:
Sana maka tulong
23. classification of screw driver
Answer:
A screwdriver is classified by its tip, which is shaped to fit the driving surfaces—slots, grooves, recesses, etc. —on the corresponding screw head. ... The two most common are the simple 'blade'-type for slotted screws, and Phillips, generically called cross-recess, cross-head, or cross-point.
24. 2. It is used to drive screws with cross slot heads.a) Philip screw driverc) Flat screw driverb) Wire stripperd) Stubby screw driver
Answer:
flat-head screw driver
Explanation:
a*
b*
c*
d*
the letters you entered are not in chronological order:D
hope it helps.
god bless u.
25. What kind of screw driver to tighten screws of laptop
Answer:
Torx screwdriver - used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop.
26. 1. The blade tip is wedge-shaped and resembles a negative (-) sign. This is used todrive screws with a single slot head.A. Flat Screw driverC. Allen Screw DriverB. B. Phillips Screw DriverD. Stubby Screw Driver
Answer-Explanation:
Standard/Flat Screw Driver or Letter A - blade tip is wedge-shaped and resembles a negative (-) sign. This is used to drive screws with a single slot ahead.
Answer:
A. Flat Screw Driver
Explanation:
Because the shaped of the blade is like negative (-) sign.
27. which of the following hand tools also known as nut driver?A. flat screw driverB. hex driverC. parts retrieverD. philip screw driver
Answer:
i tink its letter A
Explanation:
yanna
Answer:
B ang sagot
Explanation:
si hex ang driver
28. turn the screw driver clockwise to the screw
Explanation:
flat screwdriver or phillips screwdriver
29. How will you use the screw driver to tighten a screw?
Answer:
Hold the tip of the screwdriver
Explanation:
Hold the tip of the screwdriver with one hand as you turn its handle with the other. Grasp the handle with your dominant hand and the tip with your other as close to the head of the screw as you can. Apply enough force to turn the screwdriver clockwise to tighten the screw and the opposite direction to loosen it.
Answer:
Turn the screwdriver clockwise. When tightening a screw you should turn the screwdriver clockwise.
Explanation:
MY ANSWER IS MORE SPECIFIC
30. 6. Tighten / loosen a slotted screw.philips screw driverflat screw driverhex driver7. Loosen and tighten bolts that have a hexagonal (six-sided) head.philips screw driverflat screw driverhex driver8. Do not use ammoniated glass cleaners or any other solution on an LCD screen, unless the cleaner is specifically designed for the purpose.TrueFalse
Answer:
6. True
7. False
8. True
Explanation:
Yan sana makatulong
